GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 28
- Picture size: 6-65kB.
- Average picture size: 25kB
- Time of one picture receiving: 2-10s.
- Time of transmission to the server: more than 1 minute (depends on the picture size and GSM connection
quality).
Wires colour codes:
-brown: +10/30V
-black: GND
-blue: RS485_A
-white: RS485_B
The order of connection
:
1.
Connect the RS485_A, RS485_B, GND camera contacts and the RS485_A, RS485_B, GND Terminal
contacts correspondingly (section Contacts description).
Attention!
The Terminal and the camera grounds should be connected!
Camera has separate power supply.
2.
Insert a microSD card into the Terminal slot.
3.
Make the right settings of RS485 Terminal port for operation with cameras and fuel sensors, use
RS485FN 2 command (section Digital inputs settings) or the Configurator on Settings\Digital inputs
tab.
4.
Reset the Terminal.
5.
Make sure that the Terminal operates correctly with the camera. For this, give the makephoto 2
command in the Configurator and, after switching to the Troubleshooting tab, tick RS485. When
the Terminal receives a picture from the camera, the Troubleshooting will display RS485[0].cam. rx
pic. message. Green LED on the camera blinks rarely in standby mode and quickly during picture
transfer.
6.
Evaluate the quality of the picture in the Configurator, or eject the microSD card from the Terminal
and connect it to PC. Pictures from the camera are saved in the catalogue Pic\RS4850. A separate
catalogue is created for each date; file names reflect the time when the shots were taken.
7.
Reinsert the microSD card.
