GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 33
9
Configurator
Configurator is a PC program, which allows:
configuring the Terminal via graphic interface and with the help of commands;
troubleshooting the Terminal saving the results in a log-file;
seeing the Terminal units state in real time mode;
downloading monitoring data from the internal memory and a SD card;
sending the downloaded data to the server;
specifying areas for autoinformer.
32 and 64 bit OS are supported: Windows 2000, Windows XP, Windows Vista, Windows 7.
9.1
Program installation and running
Download the Configurator program from the
site
and launch it.
Attention!
Program installation may require changes of crucial OS elements. Do not let your antivirus
program block the installer operation.
In case of a security system warning, confirm launching the program.
During the installation old drivers will be deleted and new ones will be installed. It is possible to install the
major version of the Configurator or a limited one. The latter one allows uploading archive and receiving
the current parameters of sensors, but not changing the settings.
Start the Configurator program (Start menu\Programs\GalileoSky\Configurator). Turn on the power of
the Terminal and connect it to the computer via a USB cable.
After the Terminal connection the program loads all the device settings parameters automatically. If the
program identifies the Terminal, all the buttons on the vertical left-hand panel will be active.
