GALILEI GIANO 70, User And Maintenance Manual

Page: 38 / 48

f Cod. 80001730 – 01.09.2014
LED LIGHTING SYSTEM
On/Off switching via Dixell XR50CX
If installed, the optional LED lighting system is operated via the keyboard of the electronic controller, by
pressing the button shown in the below pictures. Please note that the icon on the button can vary
according to the different versions of the same controller.
By pressing the indicated button a specific on-board relay is engaged, thus powering the related lighting
system. The “Switch-On
status”
is also confirmed by the message “AUX” on the display and memorized by
the controller itself. This status remains stored and active also in case of switching-off of the cabinet
(operated by the cabinet’s main switch) or temporary black-out. At the restart of the unit, or once the
power has been restored after a blackout, the lighting system will be automatically powered.
Attention : In case the controller’s “On/Off” button has been activated by third parties (this function is
instead normally “factory disabled”) and the related button is used to operate the cabinet, the
“Switch-On Status” of the lighting system is not memorized by the controller.
On/Off
Lighting System
On/Off
Controller (disabled)