By pressing ENTER on Input Routing, and then rotating the “PM2” or “PM3” encoders, it is possible to
select the main Inputs for the DS-SP36, allowing the User to choose between Analog or S/PDIF Digital.
The selection can be confirmed by pressing the “ENTER” button. The following screen shows that the
Analog Input has been selected:
– Power-On Procedure:
this gives you the ability to select the option that will apply when the DS-SP36
powers up after being switched on.
– Delay Time/Distance:
this page allows you to select the measurement unit to be used for the Delays:
Time (in milliseconds “ms”) or
Distance
(in meters “m”:)
By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to select the measurement unit
to be used for the delay, which will be confirmed by pushing the ENTER button.
The following screen shows the selected delay measurement is Time (milliseconds):
– Software Version:
This page allows you to confirm the Software Version running on the DS-SP36:
8
Input Routing
Source: Analog
Delay Units
Unit: Time (ms)
SYSTEM UTILITY
– Software Version –
SYSTEM UTILITY
– Delay Units –
