17
EQ: [x] sub-menu –
from this sub-menu it is possible to set the Input Channels five available Parametric or
Shelving Filters.
The DS-SP36 allows the user to select either Bell or Shelving Parameters and assign them independently
using the 5 available filters.
In order to select the filter's type, it is necessary to have the filter's GAIN=0.0dB, then using the PM2
encoder, rotate it “clockwise” in order to select the Bell filter's Bandwidth, or “counter-clockwise” to select
the Shelving filter type (Low or High) and its order (1st or 2nd).
So, in order to define the filter type for the filter number 1 (“x”=1), it is necessary from the above screen, to
enter the filter's editing page pressing the ENTER button, and the screen will appear as follows:
In this case, the filter's GAIN=0.0dB, and BW=1.05, the current filter selected is a Bell type now, rotating the
PM2 encoder clockwise, the parameter BW will range from 0.05 up to 3 for identifying a bandwidth value for
a Bell filter.
If a Bell filter is selected, then the Gain can be modified from 0.0dB and the BW will range between 0.05
and 3.
If the user wants to select a Shelving filter from the above setting, with the GAIN=0.0dB (if the GAIN is not
0.0dB, it is necessary to set it at 0.0dB using the PM3 encoder), rotate the PM2 Counter-clockwise. Once
BW reaches the 0.05 value, with the next step of the PM2 counter-clockwise rotation, the selection of the
Shelving filters will be entered.
Still rotating the PM2 counter-clockwise, the Shelving filters and their order will be selectable in the
following sequence:
1. 1st order Low Shelving = -6LoSh [on the screen]
2. 2nd order Low Shelving = -12LoSh [on the screen]
3. 1st order High Shelving = -6HiSh [on the screen]
4. 2nd order High Shelving = -12HiSh [on the screen]
Once the desired Shelving filter is selected, the PM3 can then be used to select the desired GAIN and
when the GAIN is set at a value different from 0.0dB, then the filter type cannot be changed until this GAIN
is returned to 0.0dB.
Input-A EQ-X
1.00KHz BW1.05 0.0dB
Input-A EQ-1
–› 1.00KHz BW1.05 0.0dB
