12
For example, if we want to delete the preset 10, “Stage 1 2x2”, the screen will show the following:
Confirm the deletion by pressing “ENTER” again. This will force the DS-SP36 to erase the selected preset
and the following transition screen will appear:
Once the preset is deleted, the above screen will disappear, returning to the following screen:
Note:
At any time it is possible to quit the deleting action by pressing the “ESC” button.
Interface Utilities Sub-menu
– this sub-menu allows you to define the remote control interface
[USB or RS485] to be used for controlling the DS-SP36 :
From “Interface Utilities”, press “ENTER” to access the Interface Setup.
–
Interface Setup:
this screen allows you to choose the remote control protocol for the DS-SP36.
By pressing “ENTER” and then using the PM2 or PM3 encoders you can choose between the two possible
interfaces (USB or RS485 ) for the DS-SP36.
Pressing ENTER on a selected source will make an asterisk appear to the right of the description on the
LCD, as in the following example which shows the selected interface as USB.
[Enter] to Delete
10: Stage 1 2x2
Erasing Xover Memory.....
10: Stage 1 2x2
PROGRAM UTILITY
– Delete a Program –
UTILITY MENU
– Interface Utilities –
INTERFACE UTILITY
– Interface Setup –
Interface Setup
Source: USB
