Pressure relief device (PRD)
To meet European standards, the shower unit features an integral pressure relief device (PRD). The PRD provides a degree of shower
unit protection should an excessive build up of pressure occur within the shower.
DO NOT operate the shower with a damaged or kinked hose or blocked shower head, as this causes the PRD to operate. Failure to
follow this instruction will invalidate the guarantee.
The shower will only function correctly with the hose and handset provided (see showerhead installations supplied with the kit).
Failure to do so may result in the operation of the PRD and will invalidate the PRD guarantee. Please fully commission the shower
prior to use following the instructions on page 12. Failure to do this could cause the PRD to operate and will invalidate the guarantee.
The shower must be sited over a bath or shower tray as in the event of the PRD operating water will drain from the bottom of the
shower unit.
Product overview
This product is supplied with a 1 year guarantee. If a defect that can be attributed to faulty design, materials or workmanship
should arise with the product within the first year of purchase, the unit will be repaired or replaced at our discretion free of charge.
Please retain your proof of purchase for inspection in the event of a claim during the guarantee period. In the event of any product
problems, please contact the customer service helpline on 01959 560760 for assistance.
5
Cover
Badge
Temperature
control
Start/stop
button
Temperature
control valve
PRD
Shower
outlet
Start/stop
valve
Water inlet plug
both inlets one
to be removed
Water inlet
Inlet filter
Protective cover
Water inlet
Pressure switch
Earth terminal
Spacer x 3 (option)
- enlarged
(located inside cover)
Terminal block
Thermal cut-out
Shower components and features
Shower components
(kit may vary from that shown)
