Gaggenau EB333111, User Manual And Installation Instructions

Page: 53 / 56

Installation instructions
en
53
25.6 LAN connection to the home network
This appliance can be networked. You can connect the
appliance to the home network using a LAN cable. The
scope of delivery does not include a LAN cable.
Establishing the LAN connection
1.
Before installing the appliance, insert a LAN cable
into the socket on the back of the appliance.
2.
Use the strain relief to secure the LAN cable in
place.
3.
Connect the LAN cable to a network connection.
25.7 Installing the appliance
1.
Observe the clearances when installing in a tall unit.
2.
Push the appliance all the way into the built-in unit.
‒
Do not kink or trap the connection cable, or
route it over sharp edges.
3.
Remove the transit bolt from the door.
4.
Centre the appliance.
There must be an air gap of at least 2 mm between
the appliance and the adjacent unit fronts.
5.
Use a spirit level to adjust the appliance so that it is
perfectly level.
6.
Open the appliance door.
7.
Secure the appliance at the top on both sides using
the screws provided.
25.8 Removing the appliance
1.
Disconnect the appliance from the power supply
2. Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.