30
The vacuum in the plastic
bag is not retained.
The bag is defective.
Sharp parts of the food (for example
bones) may poke holes in the bag.
Check the bag for damage. Use a
different bag if it is damaged. If the
damage is caused by sharp-edged
parts of the food, as far as possible,
position these in the bag in such a
way that they cannot damage the
wall of the bag.
The heat-sealed seam is
defective.
The heat-sealing time you have
selected is unsuitable for the plastic
from which the bag is made.
Select a different heat-sealing time.
There is liquid, grease or crumbs
along the heat-sealed seam. The
bag has creases along the heat-
sealed seam.
Make sure that the bag is dry, that it
has no creases, and that it is posi-
tioned fully on the heat-sealing bar.
Use a different bag. Fold over the
edge of the bag by 3 cm before you
fill it.
The lid cannot be opened.
A slight vacuum has formed and it is
holding the lid closed.
Do not use force or tools to open it.
Initiate vacuum-sealing again and
then cancel it immediately.
Disconnect the appliance from the
mains power supply. Wait
30 seconds and then start up the
appliance again.
Touch the
ÿ
symbol for more than
5
seconds. The system is reset.
Fault
Error
Causes
Possible remedy
