15
Operating the appliance
Oven interior
The oven interior has four insertion levels. These are
counted from the bottom up.
9
CAUTION
Do not place anything on the cooking
compartment floor. Do not cover it with aluminium
foil. A build-up of heat could damage the
appliance or cause injury.
9
CAUTION
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting the rack
The accessories feature a rack stop function. The rack
stop function prevents tilting of accessories when
pulling them out. You must insert accessories in the
oven interior correctly so that tilt protection will work.
Inserting the rack
1
Tilt the rack to guide the rack stop in between the
rails of the rack holders
¨
. The rack stop has to
face downwards.
2
Lower the rack and slide it into the oven, so that the
rack stop can engage
©
. Make sure the rack’s
safety rod is at the rear and top
ª
.
Turning on
1
Set the required heating mode using the function
selector. The chosen heating mode and the default
temperature are displayed.
2
If you want to change the default temperature:
set the required temperature with the rotary
selector.
The preheating symbol
’
appears on the display. The
bar continuously shows the preheating status. When the
set temperature is reached, a signal sounds and the
preheating symbol
’
goes off.
Note:
The oven interior lighting stays switched off at a
temperature setting below 160° F (70°C).
Summary of Contents for BO 451 611
Page 1: ...Gaggenau Use and care manual BO 450 451 611 Built in oven...
Page 55: ......
