Gaggenau BO 451 611, Use And Care Manual

Page: 14 / 56

14
Completing initial set-up
"Initial set-up complete" appears in the display.
Confirm with
™
.
The appliance enters the standby mode and the standby
display appears. The appliance is now ready for
operation.
Heating up the oven
Make sure there are no packaging remainders left in the
interior.
Heat up the empty, closed oven to dispel the 'new'
smell. An hour with convection
H
at 390° F (200°C) is
ideal. For details of how to set this heating function,
refer to the section entitled
Operating the appliance
.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
Activating the appliance
Standby
The appliance is in the standby mode when no function
is set or the child lock is activated.
The control panel's brightness is reduced in the standby
mode.
Notes
‒ There are various displays for the standby mode.
The GAGGENAU logo and the time are set by
default. Refer to the section entitled
Factory setting
if you would like to change the display.
‒ The display's brightness depends on the vertical
viewing angle. You can adjust the display by way of
the "Brightness" setting in the factory settings.
Activate appliance
In order to exit standby mode, you can either
▯
Set the function selector,
▯
Touch a control panel,
▯
or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
‒ If "Standby screen = off" is selected in the factory
setting, you must turn the function selector to exit
the standby mode.
‒ The standby display appears again if you have not
made any settings for a long while after activation.
‒ The cooking compartment lighting goes out after a
little while if the door is open.
,QLWLDOVHWXS
FRPSOHWH