Gaggenau BM 270, Instruction Manual

Page: 19 / 40

19
Timer
You use the timer menu to make the following settings:
3
Timer
4
Stopwatch
Note: If you turn the function selector while the timer
or the stopwatch are running, a message will appear
in the display. Press
>
to pause the timer or
stopwatch. The appliance is ready for operation. To
continue operation of the timer or stopwatch, turn the
function selector back to the zero setting.
Calling up the timer menu
The appliance must be on and the function selector
must be at
0 or
c
.
Touch any touch key. The display is activated. The
M
timer symbol is displayed.
Touch the touch key next to the
M
symbol. The timer
menu is displayed.
Timer
The timer only runs if no other function is set. You can
enter a maximum of 90 minutes.
Setting the timer
1 Call up the timer menu.
The timer function
3
is displayed.
2 Use the
@
or
A
touch key to set the required time.
3 Touch the
>
touch key.
The timer menu is closed and the timing begins. The
3
symbol and the elapsed time are shown in the
display bar.
A signal sounds once the time has elapsed. The signal
stops when you touch the
G
touch key.
To switch off the timer before it has finished, call up
the timer menu, select the
3
timer function and touch
F
.
*