3. After fan is installed and hanging straight.
Tighten the anti-wobble canopy bolts with
pliers or wrench to eliminate wobble during
operation. Note: Over tightening bolts may
damage canopy.
4. Ensure all wires are arranged in a tidy
fashion, and make sure you can place the ball
to sit well into the canopy. This is important to
make sure the fan is free from wobbling. Align
the open slotted holes with the two screws
inserted. Give the fan a slight turn until the
washers align with the closed end of the
slotted holes. Insert the remaining two screws
and washers in the remaining two holes of the
canopy. Tighten all screws.
Ensure all wires are arranged in a tidy fashion, and make sure you can place the ball to sit well into
the canopy. This is important to make sure the fan is free from wobbling. Align the open slotted
holes with the two screws inserted. Give the fan a slight turn until the washers align with the closed
end of the slotted holes. Insert the remaining two screws and washers in the remaining two holes of
the canopy. Tighten all screws.
Page 10
