1.
You may purchase a fan with Light Pan instead of cluster light kit mentioned above.
For any kind of light kit, you should complete the blade installation before attaching
this light kit assembly. REMEMBER to discount the main power before installing the
light kit by removing the fuse or circuit at the electrical panel box
INSTALLING DISC LIGHT KIT (OPTIONAL)
2.
The whole light kit assembly includes the above parts. Locate these parts from the
package and be careful not to damage the glass shade.
3.
Locate the two light kit wires from the switch housing of the fan assembly. Attach
the light kit wires from the light pan to the light kit wires of the switch housing, White
to White, Blue to Blue of the switch housing using the wire nuts provided.
4.
Align the three holes on the light pan with the three holes on the switch housing rim.
Secure the light pan onto the switch housing with the three screws and washers
provided.
5.
Install the light bulb (not included) onto the lampholder sockets. Uses maximum 60
watts as the warning label suggested.
6.
The glass shade belongs to the twist-and-lock type. The rim of the glass shade
comes with two grooves. Align the openings of the two groves with the two notches
of the light pan.
7.
Turn the glass shade under the light pan along the grooves until the glass is
completely in place. When it is locked in place, it cannot be loosened just by
counter-rotating the glass. Try this to make sure that the glass is safely locked.
8.
Route the two pull chains through the two holes on the side if the light pan.
9.
Attach the pull chain extensions at this stage by passing the extension chains.
10.
Check that all assemblies are firmly secured. Your light kit is now ready for use.
Page 14
