P a g e
|
26
Figure 18 Install the leak barrier underlayment
Step 1e: Install QuickStart® Peel and Stick Starter Roll...
Install the QuickStart® Peel and Stick Starter
Roll over the shingle headlap, covering the 1.5 inch (38 mm) gap between the leak barrier and
the top of the shingle exposure (
Figure 19
). The QuickStart® Peel and Stick Starter Roll should
be the same width as the solar array.
Figure 19 Install QuickStart
®
Peel & Stick Starter Roll
Step 1f:
Install the VersaShield® SOLO™ Fire-Resistant Slip Sheet in the Field of the Solar Array...
The
VersaShield® SOLO™ Fire-Resistant Slip Sheet should be installed over the StormGuard® Leak
Barrier and the QuickStart® Peel and Stick Starter Roll, leaving the same 1.5 inch (38 mm) gap
between the shingle headlap and the edge of the slip sheet (
Figure 20
). To fasten, use
corrosion-resistant plastic cap nails or staples with plastic caps. The Slip Sheet should be the
same width as the solar array.
Solar Array
3'
3'
Leak Barrier
QuickStart
®
Peel and Stick
Starter Roll
Leak Barrier
1.5"
1.5
"
