GAELCO TOKYOCOP, Operator'S Manual

Page: 14 / 77

GAELCO - TOKYOCOP
14
It is best to unpack the machine where it is going to be used or in a place as near as
possible to this. Two people are needed to lift the cardboard packaging over the top of each
unit.
Once the packaging is removed, the machine looks as shown in the illustration.
Normally, GAELCO products are ready to assemble immediately after transporting to the
location. Nevertheless, some mishandling may occur during transportation. Check the
following points to ensure that the machine has been properly delivered:
x
Examine the cabinet exterior for dents, chips, or broken parts
x
Verify that castors and levellers are not damaged
x
Inspect the major assemblies, such as the video display monitor, handlebar and seat.
Make sure that they are mounted securely and that all ground wires are firmly
connected.
x
Ensure that the power supply voltage and frequency requirements meet those of the
location.
x
Ensure that the fuses already installed meet the specified rating and type.
x
Inspect the power cable to ensure that it is not damaged.
x
Verify that the keys delivered with the machine open all doors.
x
Check if all the accessories are included.
5. UNPACKING, ASSEMBLING & INSTALLATION
5.1 INSPECTION BEFORE ASSEMBLING