GAELCO TOKYOCOP, Operator'S Manual

Page: 25 / 77

GAELCO - TOKYOCOP
25
Debug mode
This option is for programming purposes only and has no utility for the operator.
Save player game
This option allows the player to save the game, by means of a personal code introduced
with the alphanumeric keypad. The game can be restored later at the same stage as it was
when saved.
Language
Using this option can change the language of the messages shown on the screen. The
languages available are: English and Japanese.
Exit
To leave this screen go to the Exit line and push the START button placed in the center of
the steering wheel.
This screen shows the status of the machine.This could be: NOT LINKED, MASTER or
SLAVE. If it is linked with another machine you have to assign a different status to each
one of them: one must be MASTER and the other SLAVE, as indicated on the options.
Just for playability convenience, it is recommended to assign the MASTER status to the
machine placed at the LEFT.
The most common condition is to link two machines directly, with a cable delivered by the
manufacturer. In that case you must select “No” for the option
On line mode . The linking
system complies the Ethernet 10/100 specifications.
The
Test option allows you to know the actual status of the machines. This option has to
be selected on both machines and the initial message will be “TESTING”. After few
seconds the next message will be LINK OK or LINK ERROR. If the machines have
different software version, the message will be “THIS VERSION CAN BE UPDATED” for
the machine which has the older version, or “THIS VERSION IS THE NEWEST ONE”.
When linked, the two machines must to run the same software version. If not, you
must update the PCB which runs the older version.
6.5 LINK SETTINGS
LINK SETTINGS
Link mode: MASTER
Test:
On line mode: No
Exit