GABRIEL KERAMIK AB
18 • ROUND
66 cm
kakel
27 "
kakel
Kakelsats hög modell (standard)
30 "
kakel
66 cm
tiles
27”
tiles
30”
tiles
Assembly tiles and cassette
• Mark the centre line.
• Check that the floor is level.
• Check the body surface. Is it vertical? Be aware that you must
compensate for any irregularities.
• All tiles shall be in level vertically and horizontally.
• For best adherence - apply adhesive on
both tiles and body
with an 8 mm toothed trowel.
• A joint width of approx. 3mm is recommended. The tiles are hand-
made with tolerance and joints could vary accordingly. The overall
appearance is important. We recommend wooden wedges.
• Seal with adhesive between tiles and body at the firebox and
the soot holes.
• Start tiling from the bottom and the centre and work towards the sides.
• Do not block the hole/grate for inlet air for convection heat.
• The tiles are hand-made - there might be some variations in
measurements and colours.
IMPORTANT STEPS PRIOR TO TILING
TILING PLAN
Tiling and preparations
