44
Firstly open the two brackets and carefully insert light outlet (negative end) of the laser
tube toward reflector No. 1 into the V-shape bracket as shown in the figure below:
Then, buckle the belt on the laser tube bracket and screw down to fix securely the laser
tube
Fig1-9
1
2
3
5
4
6
7
8
9
10
11
Attention: Fix the laser tube with proper force to avoid damage against it.
It is a must to keep the water inlet (light outlet end) at lower part of the tube.
After fixation of the laser tube, connect the water inlet end with water protection to water
inlet at negative end of the laser tube, and connect another water inlet hose reliably to water outlet
with high pressure as shown in the figure below: