31
Fig 1-28
The followings are an introduction to the parameters:
Pulse equivalent: Pulse required for each 1mm forward of the movement shaft.Correctness
of movement length is depended on this parameter;
Worktable format:the max movement of every axis of the machine.
Reset direct: Reset direction of the machine. Aero position may differ due to different
machine;
Zero (limit)level: Trigger level of sensor differs due to different types of machine and
Configurations. Setting based on actual need is required;
Power control signal: Power control method of laser device including PWM, frequency and
analog;
Space between two laser heads: Electric dual-laser head machine is required to set this
Parameter,and it indicates the minimum space between the two laser heads;
Tips:
Please refer to User Manual for G.Weike MPC 6565 Control System for more details.
1.3 System configuration
Component
Parts
Type
Manufacturer
Note
Movement
system
Motor
Step. servo
China-made or
imported
Optional
Transmission
mechanism
Timing belt, Ball, screw
China-made or
imported
Optional
Guide rail
inner rail. Linear guide
rail
China-made or
imported
Optional
Optical
system
Reflector
Molybdenum reflector
China-made or
imported
Optional
Focus lens
38.1
、
50
、
63.5
、
100
China-made or
imported
Optional
Pneumatic
system
Exhaust blower
350W
、
550W
China
Optional
Air blower pump
Large. medium. small
China
Optional
Cooling
system
Water tank +water
pump
Water tank,industrial
water chiller
China
Optional
Control
Controller
MPC6525
、
MPC6565
China
Optional