G-Technology G Speed studio Product Manual Download Page 58

Page: 58 / 119

p. 58

Configuring G-SPEED Studio R

Viewing Physical Drive Statistics

To view physical drive statistics:
1. Click the

Physical Drive

icon.

2. Mouse-over the physical drive you want, then click the

View

button.

3. Click the

Statistics

tab.

Physical drive information includes:

• Data Transferred

• Read Data Transferred

• Write Data Transferred

• Errors – Number of errors

• Non Read/Write Errors

• Read Errors

• Write Errors

• I/O Request – Number of requests

• Non-Read/Write Request – Number of requests

• Read I/O Request – Number of requests

• Write I/O Request – Number of requests

• Statistics Start Time – Time and date

• Statistics Collection Time – Time and date

To clear physical drive statistics, see

Clearing Statistics

4. Click the

icon to close the settings panel.

Summary of Contents for G Speed studio
























































































































Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands

G-Technology G Speed studio, Product Manual

Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands