G-Technology G Speed studio Product Manual Download Page 29

Page: 29 / 119

p. 29

Configuring G-SPEED Studio R

G-SPEED Studio R Utility Overview

The G-SPEED Studio R Utility interface consists of menus and icons, each leading you to
a specific function.

The G-SPEED Studio R Utility interface with the Dashboard displayed:

Toolbar icons

•

G-SPEED Studio R Utility

– About, Checking for Updates, Preferences, Services, Hide, Quit

•

View

– Show/Hide Toolbar, Customize Toolbar, Devices (G-SPEED Studio R units)

•

Dashboard

– Show the Dashboard

•

Storage

– Wizard, Disk Array List, Logical Drive List, Spare Drive List

•

Admin

– System Information, Events, Background Activities, System Updates,

Performance Monitor, Restore Factory Defaults
•

Window

– Minimize, Zoom, Close Window, Bring All to Front, G-SPEED Studio R unit

•

Help

– Links to Online help and the Support Site

Most of the functions accessed in the menu bar are described in this chapter.

Summary of Contents for G Speed studio
























































































































Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands

G-Technology G Speed studio, Product Manual

Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands