G-Technology G Speed studio Product Manual Download Page 107

Page: 107 / 119

p .107

Maintenance for Your Drive

Restore the Drive Icon

If your G-SPEED Studio R drive icon was erased during the reinitializing process (see

previous section

), you can restore the icon with the following easy steps.

NOTE: This process is not required for G-SPEED Studio R operation. However, it will make
your drive’s appearance on the computer desktop look more attractive and intuitive.

1. To get the G-SPEED Studio R icon package, go to

www.g-technology.com/support

and

navigate to your product. There will be a link to download the drive icon.

2. Once downloaded, double-click the ZIP file to open. Next, double-click the DMG file
to open the G-Technology Icons package.

3. Click to select the drive icon for G-SPEED Studio R in the package window. Press
C to copy the icon (see below).

Summary of Contents for G Speed studio
























































































































Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands

G-Technology G Speed studio, Product Manual

Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands