G-Technology G Speed studio Product Manual Download Page 38

Page: 38 / 119

p. 38

Configuring G-SPEED Studio R

Enclosure information includes:

• Enclosure ID

• Enclosure Warning Temperature Threshold

• Controller Warning Temperature Threshold

• SEP Firmware Version

• Max Number of Controllers

• Max Number of Fans

• Max Number of Power Supply Units

• Enclosure Type

• Enclosure Critical Temperature Threshold

• Controller Critical Temperature Threshold

• Max Number of Physical Drive Slots

• Max Number of Temperature Sensors

• Max Number of Voltage Sensors

Click the

icon to close the information panel.

Viewing Temperature Sensor Information

To view the status of the temperature sensor:
1. Click the

Dashboard

icon, then click the

Temperature

link.

2. Scroll down until you see

Temperature Sensors

Temperature Sensors information includes:

• ID

• Status (Normal, Warning or Critical icon)

• Location (Controller or Backplane)

• Healthy Threshold (Enclosure Warning Temperature Threshold)

• Current Temperature

Click the

icon to close the information panel.

Summary of Contents for G Speed studio
























































































































Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands

G-Technology G Speed studio, Product Manual

Search results

Summary of Contents for G Speed studio

Reviews:

Related manuals for G Speed studio

Brands by name

Popular brands