p. 63
Configuring G-SPEED Studio R
Running Media Patrol on Your Physical Drives
Media Patrol is a routine maintenance procedure that checks the magnetic media on
each disk drive. Media Patrol checks are enabled by default on all disk arrays and spare
drives. Media Patrol is concerned with the media itself, not the data recorded on the
media. If Media Patrol encounters a critical error, it triggers Predictive Data Migration
(PDM) if PDM is enabled on the disk array. See
Making Disk Array Settings
.
To run Media Patrol on your physical drives:
1. Click the
Background Activities
icon. The list of background activities will appear.
2. Mouse-over Media Patrol, then click the
Start
button.
To pause or resume a Media Patrol:
1. Click on the
Background Activities
icon. The list of background activities will appear.
2. Mouse-over Media Patrol, then click the
Pause
or
Resume
button.
To stop/cancel the Media Patrol:
1. Click on the
Background Activities
icon. The list of background activities will appear.
2. Mouse-over Media Patrol, then click the
Stop
button.
3. In the Confirmation box, type the word “confirm” in the field provided, then click the
Confirm
button.
Summary of Contents for G Speed studio
Page 4: ...Safety and General Use Safety Precautions p 5 Backup Your Data p 6 ...
Page 24: ...p 24 Configuring G SPEED Studio R Thunderbolt daisy chain connections HDMI ...
Page 113: ...Appendix RAID Levels Explained p 114 ...
Page 115: ...Support Warranty Technical Support p 116 Limited Warranty p 117 Copyright p 119 ...
