18
19
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM
Number
of
cells
Elapsed
time
Charge
or discharge
current
Supplied
capacity
Current
voltage
battery
This screen shows the real-time status
charging. Press Batt Type/Stop key once to
stop the charge process.
DISCHARGING LITHIUM BATTERY
Number
of
cells
elapsed
time
Battery
voltage
Discharged
capacity
discharge
current
The value of discharge current on the left can
not exceed 1C, and the value on the right can
not be under the voltage recommended by the
manufacturer to avoid deep discharging. Press
Start/Enter for more than 3 seconds to start
discharging.
This shows the real-time status of discharging,
you can press Batt Type/Stop key to stop
discharging.
This displays the number of cells you set up
and the processor detects. s detected by the
charger and cells set by you at the previous
screen. If both numbers are identical you can
start charging by press Start/Enter button. If
not, press Batt Type/Stop button to go back to
previous screen to carefully check the number
of cells of the battery pack before going ahead.
Start
Enter
Start
Enter
Batt type
Stop
'> 3 seconds
'
Start
Enter
NIMH/NICD BATTERY PROGRAM
These programs are for charging or discharging NiMH (Nickel-Metal-
Hydride) or NiCd (Nickel-Cadmium) battery commonly used for R/C model
aplications. To alter the value at the display, press Start/Enter key to make it
blink then change the value using or key. The value will be stored
by pressing Start/Enter key once.
To start the process, press Start/ Enter button for more than 3 seconds.
CHARGING OF
/
BATTERY
NIMH NICD
The charger will charge NiCd and NiMh batteries using the charge
current set by the user.
NiMH CHARGE
CURRENT 2.0A
Battery
type
Elapsed
time
Charged
capacity
Battery
type
Charge
current
Battery
voltage
The screen displays the current state of charging.
To stop the process, press Batt type/Stop key once.
The audible sound indicates you the end of process.
This program is for charging of NiCd/NiMH
batteries associated with R/C models applications.
You can press Start/Enter key to make it blink and
then or to change the parameter value.
Press START/ENTER key to store the value.
In this program the charger detects the condition of the battery which is
connected to the output and automatically charges the battery. In this mode,
you should set up the upper limit of the charge current to avoid damage by
excessive feeding current. Some batteries of low resistance and capacity
can lead to higher current in the auto charging mode.
N i M H A u t o C H A R G E
C U R R E N T 2 . 0 A
This program is for charging of NiCd/NiMH batteries.
You can press the Start/Enter button to make it blink
and then press the / button to change the
parameter value. Press the Start/Enter button more
than 3 seconds to start the charging process.
Battery
type
Start
Enter
Batt type
Stop
'> 3 seconds '
CHARGING
/
BATTERY IN THE AUTO CHARGE MODE
NIMH NICD
Start
Enter
Batt type
Stop
'> 3 seconds '
- +
- +
- +
