P a g e . 1 6
Connect triangel washer
pull
hammer with welding gun
.
Approximately a 90° angle to
the dent,put on pressure
and press trigger.
Slide the hammer to opposite
direction
to pull the dent out
.
F003+F020
Set correct time.
Se t corr ect am pe rag e.
Remark
:
1
、
Setting amperage too high or time too long can cause workpiece surface (vehicle
body)damage .
Please weld other workpieces for practice before actual operations
.
2
、
Setting correct amperage and time according to the workpiece thickness
3
.
Triangle
washer
welding
can
replace
washer
welding
.
It
can
pull
out
the
dent
directly
after
welded
.
4
、
Continuing another operation is available after this procedure finished .If not, please
shut off the main power supply and switch
off the unit
.
%
Connect negative outside wire
to a clean,paint-free location
on metal workpiece,as close to
welding area as possible.
b
、
Triangle Washer Welding
7 . S t e el D ent P ulle r A p pli c ati o n
