1 . A l u mi n iu m D en t P ul le r C on t ro l s
P a g e . 9
The diameter of studs is 3mm-6mm. The welder is based on stud welding
technology. It has advantages as high efficiency, low heat emission for workpiece
surface, quality weld appearance, firm welded joint and low energy consumption.
It could save your time and materials with excellent weld quality (great strength,
no distortion, no leakage),easy and simple operation without complicated
procedures such as drilling holes, riveting, welding and polishin
g…
etc.The
resistance heat is extensively used in welding field, suitable for welding of
various metallic materials such as magnetism copper, stainless steel, copper,
aluminum, aluminum alloy, etc.
Please read this instruction
manual before use .
It is easy and simple to operate the stud welder even though you have no relevant
experience. Firstly, you could turn the main power switch to the “on” position
and adjust the current according to relevant stud diameters. Put the chosen stud
into the gun, then the welding process could be started. The greases of the
workpiece surface should be cleared every time before welding to avoid poor
contact. It has a little welding spatter, please wear glasses and gloves.
You could get the best result by connecting H1 and H2 with both edges of the
workpiece surface for large area welding (you could choose either H1 or H2 for
small area welding).
Weld metallic stud or post form components in sheet metal.
A. Voltage display
B. Voltage indicator
C. Voltage selector
D. Power indicator
E. Overheat indicator
F. Gun trigger indicator
G. Over-voltage indicator
H1/H2. Earth cable
J/K. Gun cable
A
B
D
C
E
F
G
H
1
H2
J
K
O p e r ation
