P a g e . 1 7
Connect carbon
rod and
carbon
rod adaptor with
welding gun
.
Carbon
rod turning
in
clockwise to heat up
the stretched
panel
Use cold water or wet rag
to cool down the heated area
that makes the stretched
panel
shrunken as normal status
.
F007+F009+F020
Set correct amperage
.
Set correct time
.
Remark
:
1
、
Setting amperage too high or time too long can cause workpiece surface (vehicle
body)damage .
Please weld other workpieces for practice before actual operations
.
2
、
Setting correct amperage and time according to the workpiece thickness
.
3
、
Continuing another operation is available after this procedure finished .If not, please
shut off the main power supply and switch off
the unit
.
.
%
Connect negative outside wire
to a clean,paint-free location
on metal workpiece,as close to
welding area as possible.
c
、
Carbon Rod Heating
7 . S t e el D ent P ulle r A p pli c ati o n
