SuperPro Series Installation Manual
10. If DSL, ISDN or ATM service is being provided, connect a CAT5e jumper from the CAT5e
connector to the appropriate ISDN or ATM modem. Then connect a CAT5e jumper from the
modem to the appropriate zone.
11. Distribute any additional signals in the same manner.
Blue Cat5 cable
Teleco CO lines
1 thur 4
Terminated on
back side of hub
Yellow Cat5 cable
DSL or ATM lines
or extra Teleco
CO lines
Terminated on
backside of hub
Cable TV (CATVF) or
Antenna.
Terminated on
backside of hub
Modulated signals
Terminated on
backside of hub
Satellite LnB A and B
Future Fiber Optic services
Extra connection points
Port labels
Fig. 6
Coax Hub Hookup
The Coax Hub distributes modulated signals from VCRs, DBS Satellite receivers, DVD players,
security cameras, and Antennae/CATV. High-quality broadband designs and components are
used throughout, assuring quality distribution from source to receiver. Feeds SATV signals from a
dual LNB dish to two receiver locations and (up to) four modulated input sources and one
CATV/ANT input to (up to) sixteen television locations (HBC416).
Ground
12 VDC
Power IN
COAX DISTRIBUTION HUB
CATV IN
MODULATED IN
OUTPUT
OUTPUT
Front View
Back View
1
2
3
4
5
6
7
1. Cable TV or Antenna input
2. Modulated
input
3. Coax
output
4. Power supply (use RG6 cable to
connect power supply and amplifier)
5. Grounding lug (ground to a good earth
ground
6. Power supply input
7. Power LED light indicator
Page 12
FutureSmart
