51834295_V_1_7.DOC
57/60
4. SPECIAL mode:
Rotate the TILT jog wheel until you see the S’ letter (Special) in the upper line right side of the display. In this
mode the program scene changing works differently.
If you start a program now, only the first unit channels will load. After wait time the program scene number
will not change, but the second unit channel will load. And so on. After the last unit channel loaded, the
program scene number will increase by one.
With this mode you can create great effects with simple programs. Try to change in special mode the wait
and speed time. If the speed time is higher then the wait time, one of the beams is still moving while a new
beam will start to move.
5. SCENE mode:
By pressing the SCENE button the shifting of the programs stops on the current group; step shifting will be
carried out by pressing the SCENE button again or by pressing buttons 1-16. This mode can be switched off
only by pressing another event group button: RECORD, PROGRAM, PRESET, SEQUENCE.
Control of the head movement and mirror movement speed:
In automatic mode the speed of the beam movement can be influenced by the SPEED and WAIT
potentiometers.
1. Set up SPEED for own time:
With the SPEED potentiometer the movement time can be set in a range of 0.300s-5.000s.
It is carried out according to a logarithmic scale, as a consequence the beam speeds can be
set very comfortably.
2. SPEED set for wait time:
By turning the SPEED potentiometer to
maximum value, the speed times should be the
same as the scene shifting times. As a
consequence, the speeds can be set with the
WAIT potentiometer, and the beams will move
to the new position within the time of the scene time. At the moment of their stop the next
scene begins to load. So during the program running the beams will never wait at the same
time. In the right upper line the display indicates the SPEED value is the same as the WAIT
value at present.
Launching the sequences:
By pressing the SEQUENCE button the sequences can be launched on buttons 1-32. At that time in the
upper line of the display the number of the sequence launched by chance and its step number appears, with
the current speed on the right side. In the lower line the current position of the sequence is shown, which unit
is in open or closed position at that moment. If the sequence button is kept pressed and you press any of
buttons 1-32 this way, the sequence belonging to it will not start but the controller displays the name of that
sequence in the lower line for a short time, which can be given in the sequence edition. Thus a sequence
can be identified easily, there is no chance to start a wrong sequence accidentally!
There are more options to control sequence speed. In the minimal position of the wait slider the sequence
will stop. In the maximal position of the wait slider the sequence will run by music control. You can select
also an AUTO BPM value with the PAN jog wheel or give a manual bpm value with the BPM button.
Calling the preset scenes:
By pressing the PRESET button the preset scenes can be started with buttons 1-32. At that time the
information does not change on the display.
When calling the preset scene, the channels of the units belonging to the preset scene switch to manual
mode, their value is set according to the preset scene. The LED of the MANUAL button starts flashing,
indicating that there is channel in preset mode. A preset scene can be terminated by pressing the PRESET
button. If the preset button is kept pressed and you press any of buttons 1-32 the preset belonging to it will
not start but the controller will display the name of the preset in the lower line, which can be given in the
