51834295_V_1_7.DOC
41/60
The time having passed from putting the controller into operation appears in the lower line (second: minute:
hour).
You can log off from the menu item by pressing ESC.
MENU 6: LANGUAGE SELECTION
The name of the current language appears in the lower line of the display, it can be changed with the UP-
DOWN buttons. At present ten languages can be selected: e.g. Hungarian, English, German, Dutch, French.
If the UP/DOWN button has not been pressed, the controller returns to the setup menu by pressing the ESC
button, if any modification has been made, the controller asks for the confirmation to save the modification.
By pressing the “cancel” button (LEFT) the controller remains in the menu item, by pressing the “no” button
(ESC) the controller returns to the menu without saving the modifications; while pressing the “yes” button
(ENTER) makes the controller save the modification and return to the menu.
SETUP MENU 5: LED SETUP
The intensity of the LED’s can be set to optimal value in this menu item due to the existing light conditions in
the different application areas. The set value of the full-intensity LED light illumination is shown in the upper
line, on the LED’s of the 9-16 buttons as well. This value can be set by the DATA-1 potentiometer. In the
lower line the set value is of half-intensity. This value can be set by the DATA-2 potentiometer and is shown
on the 1-8 LED’s.
If no modification has been made in the menu item, press the ESC button and the controller returns to the
setup menu, if any modification has been made, the controller asks for the confirmation to save the
modification.
By pressing the “cancel” (LEFT) button the controller remains in the menu item, by pressing the “no” button
(ESC) the controller returns to the menu without saving the modifications, while pressing the “yes” button
(ENTER) makes the controller save the modification and return to the menu.
SETUP MENU 4: DISPLAY SETUP
The intensity and contrast of the display can be set to optimal value in this menu item due to the existing light
and temperature conditions in the different applications areas. In the upper line the set value of the
