Future Beach Equinox series, Owner'S Manual

Page: 15 / 44

Remove the Bimini Sun Shade from
the nylon bag. Unfold preassembled
Bimini Sun Shade. Attach the rod on
the back of the Bimini Sun Shade to
the molded connector on the side of
the rod. Repeat this procedure at the
other back corner.
Your Bimini Sun Shade arrives preassembled in a nylon bag.
Two separate fiberglass support rods are included in the bag.
Insert the fiberglass support rods
into metal tubes in the front of your
pedal boat with the hollow chrome
sleeves directed upwards. Push
these rods firmly down in the pedal
boat into the metal tubes.
Now insert the assembled Bimini
Sun Shades into the hollow chrome
sleeves of the fiberglass support
rods.
Now clip the tie-down cords into
place to retain the Bimini Sun Shade
in its correct position.
Hold the Bimini Sun Shade down so
that it approaches the deck of the
boat
To lock the canvas top in a particu -
lar position, extended or retracted,
squeeze and slide stoppers until
elastic cords are snug against the
side rods.
Remember to read the safety instruc -
tions.
Enjoy your ride with your new Future
Beach pedal boat.
Bimini Sun Shades and Seat
Cushions are optional acces-
sory items.
Assembly Instructions for Bimini Sun Shades
WB Series and Equinox Series
Assembly Instructions for Bimini Sun Shades
WB Series and Equinox Series
C5
C6
C7
C8
Loose aluminum
sleeves. This
end into front of
pedal boat
Tie-Down Cords
15