Future Beach Equinox series, Owner'S Manual, Page: 9 / 44

Components and Features
Future Beach Corporation has invested in the best
people, equipment, and facilities. We have brou -
ght together top designers, world class production
experts and the most innovative engineers in the
industry. Our new world class manufacturing facility
is the most advanced of its kind.
Hydrodynamic Paddle Blades
The blades work like the blade on a canoe paddle.
These paddle blades provide a smooth and power-
ful pull through the water. An important feature that
is easy to appreciate when the wind and waves whip
up in the afternoon and you have to get back to
shore.
Hull Designed for Salt Water
The solid seamless hull construction eliminates water leakage. The large displa -
cement volume of the pedal boat hull provides increased buoyancy that guaran -
tees a superbly stable, safe and smooth ride. Quick access components simplify
maintenance requirements. No special tools, are required to assemble or ser
-
veice your pedal boat even the paddle blades feature snap-in convenience.
Perfect Blend of Design and Function
We thought of everything. Your Future Beach
®
pedal boat’s graceful design co -
mes with a list of impressive standard features molded in carry handles, adjus -
table seating, cup holders and large diameter paddle wheel with hydrodynamic
paddle blades, make the Future Beach
®
pedal boats the best in its class.
Equinox Series Pedal Boats Only
Unique self bailing automatic drain valve that keeps both passagers and the boat
clean and dry. The large diameter paddle wheel and large paddle wheel blades
make pedaling easier and more fun.
Assembly Instructions WB Series Only
Carefully unwrap your Future
Beach
®
pedal boat and inspect for
any damage that may have occurred
in shipping. Report any damage im
-
mediately to the carrier in writing.
Release and unwrap parts tied to
hull.
If you purchased a boat with a
cooler lid proceed to Step 4. Oth -
erwise insert commercial tiller (Alu-
minum tiller arm) into the boat and
proceed to Step A8.
To access the paddle hub turn the boat
on its side. The paddle hub comes al -
ready installed with one paddle blade
to show the right rotating direction
of the blades. Locate an open slot
on the paddle hub. Align the base
of each blade and push it firmly into
slot. Ensure the blade snaps into the
paddle hub. Repeat for the remain
-
ing blades ensuring that all blades
are installed in the same direction as
the preinstalled blade.
Using a rubber hammer, install the
connected front and rear steering
arms onto the rudder shaft and
rudder c-clip.
A1
A2
A3
A4
9