Future Beach Equinox series, Owner'S Manual

Page: 11 / 44

With the cooler lid open install this
assembly into the hull.
Connect the front steering arm onto
the bolt and secure the nut. Tighten
with a ¾” socket.
Insert steering handle into the hole
on the cooler lid with the handle fa-
cing the front of the boat. Pass the
bolt provided through the handle and
cooler lid.
Remove the bolt from the rudder.
With the arm tiller facing forward,
install the rudder pointing to the rear
of the boat. Align the holes, then re -
place and tighten the bolt using a ¾”
wrench or socket. Test to ensure the
tiller and rudder turn together.
The WB backrest can be placed in
different locating slots to provide a
comfortable seating position depen-
ding upon the height of the user
The seat pivot bracket is a 2 piece
component that comes preassem-
bled. Remove the three screws from
the assembly and separate the 2 pie
-
ces. Install the seat pivot bracket as
shown.
Install the three screws in the seat
pivot bracket and tighten.
Assembly Instructions WB Series Only Assembly Instructions WB Series Only
Position your backrest into clip slot
and align clip holes with backrest
hole. Insert the bolt through the
backrest clip, and then tighten the
nut on the bolt to complete assem-
bly. Repeat these steps to install the
remaining backrest.
A9
A11
A10
A12
11