Future Beach Equinox series, Owner'S Manual

Page: 14 / 44

Remove the Bimini Sun Shade from
the nylon bag. Unfold preassembled
Bimini Sun Shade. Attach the rod on
the back of the Bimini Sun Shade to
the molded connector on the side of
the rod. Repeat this procedure at the
other back corner.
Your Bimini Sun Shade arrives preassembled in a nylon bag.
Two separate fiberglass support rods are included in the bag.
Nylon Bag
Insert the fiberglass support rods
into metal tubes in the front of your
pedal boat with the hollow chrome
sleeves directed upwards. Push
these rods firmly down in the pedal
boat into the metal tubes.
Now insert the assembled Bimini
Sun Shades into the hollow chrome
sleeves of the fiberglass support
rods.
Assembly Instructions for Bimini Sun Shades
WB Series and Equinox Series
Assembly Instructions for Bimini Sun Shades
WB Series and Equinox Series
C1 C5
C2
C6
C3
C7
C4
C8
Fiberglass Support Rods
Hollow
chrome
sleeves
Loose aluminum
sleeves. This
end into front of
pedal boat
14
Loose aluminum sleeves
Hollow
chrome sleeves