Back Up Warning
Back Up Warning
When the stored data is lost, the characters
"BACK UP" blink on the screen and a buzzer
sounds. When the power switch is turned on
again, the error display disappears and all the
settings return to the factory-set values. When
a Back Up error occurs, the back-up lithium
battery is probably dead, or there is trouble in
the system. To locate the cause, call your Futaba
service center. The back up lithium battery life
depends on the usage state, but is about 5 years.
SYSTEM PROGRAMMING
Press the EDIT program key [EDT] of
the standard
screen.
System functions are programmed
and adjusted by using the LCD
display screen, the five DATA
INPUT (Program) keys, and the
four CURSOR keys.
End
Adjustable
Function Rate
(Returns to
preceding screen)
Pressing the EDT (EDIT) program key of the standard
screen will display the EDIT or "Menu" screen. The
•I and t cursor keys can be used to move the
cursor bar to Line 1, 2, or 3 of the screen. The program
keys are used to select the desired programming screen
to be displayed.
NOTE: At all times, pressing the END program key will
return the display to the next previous screen.
To return to the standard screen, just keep
pressing the END key.
[13]
