ADJUSTMENTS AND FLIGHT TECHNIQUES
SNAP ROLL
Snap r o l l s can be performed using the Snap Switch.
Four snap roll directions can be set: R/U (right up), R/D (right down), L/U (left up), and
L/D (left down) snap. The snap r o l l direction is displayed on the screen. The throw of each
servo (AIL, ELV, and RUD) is adjustable.
1. When the ENT (enter) key is
pressed, the throw of each stick
is set.
Setting Method
1) Select the EDIT screen and move the cursor to Line 2 with the
cursor key, then press the MIX pro-
gram key.
2) Press the
program key. The SNAP-ROLL screen will be displayed.
3) To activate the Snap Roll program, press the
PROGRAM KEY. To inactivate the Snap Roll, press
the key.
4) Servo throw is set by pressing the
program key.
a) If the
key is pressed when the cursor is in the "ACT/INH" position, all rates will be set to the
maximum AFR rate for each channel.
b) Rates can be set individually by moving the cursor to each rate position and using the ,or
program key. A good starting point is AIL - 110%, RUD - 50%, and ELV - 80%.
