Furuno NAVpilot-700, Installation Manual

Page: 50 / 100

3. INITIAL SETTINGS
3-14
How to set the power assist mode
38.Use the knob to select [POWER ASSIST] then push the knob.
39.Use the knob to select [ON] then push the knob. When this is done the menu items for
power assist appear.
40.Use the knob to select [FOR SPEEDS UNDER] then push the knob.
41.Rotate the knob to set the highest speed at which power assist activates. The setting
range is 1.0 to 9.9 knots.
42. If you want power assist in the STBY mode , use the knob to set [POWER ASSIST
STBY] to [ON].
43.Use the knob to select [POWER ASSIST RUDDER SPEED] then push the knob.
1.
44.Turn the helm to port and starboard to set safe helm response time then push the
knob.
SAFE HELM/P.ASSIST SETUP
SAFE HELM: ON
RETURN DELAY 5 SEC
SAFE HELM RESPONSE
POWER ASSIST: OFF
SAFE HELM/P.ASSIST SETUP
SAFE HELM: ON
RETURN DELAY 5 SEC
SAFE HELM RESPONSE
POWER ASSIST: ON
FOR SPEEDS UNDER 3.0kn
POWER ASSIST STBY: ON
POWER ASSIST RUDDER SPEED
POWER ASSIST RUDDER SPEED
RUDDER SPEED: 10
TURN HELM PORT/STBD TO
SET RUDDER SPEED.
HIGHER VALUE = FASTER SPEED
PUSH MENU KEY TO CONTINUE
20 10 5 5 10 20