Furuno GD-1700, Operator'S Manual

Page: 12 / 249

x
SYSTEM CONFIGURATIONS
All NavNet products incorporate a “network circuit board” to integrate each NavNet product
on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is
assigned an IP address to enable transfer of images between other NavNet products. For
example, video plotter pictures can be transferred to a radar and vice versa. Pictures
received via the NavNet may be adjusted at the receiving end.
The number of display units which may be installed depends on the number of
network sounder connected. For a system incorporating three or more products,
a “hub” is required to process data.
For one network sounder: one radar and three plotters, or four plotters
For two network sounder: one radar and two plotters, or four plotters
NavNet system
Network Sounder
ETR-6/10N
ETR-30N
Antenna Unit
(ex. MODEL 1722/1722C/1723C)
GPS Receiver
GP-310B/320B
12-24 VDC
Other NavNet Unit
(Model 1722, etc.)
Remote
Controller
RMC-100
: Option
: Standard
Rectifier
PR-62
Display Unit
GD-1710C
GD-1700C
GD-1700
100/110/115/220/230 VAC,
1
φ
, 50/60 Hz
Echo sounder
External buzzer
PC
Echo sounder
Navigator
Memory card
interface unit CU-200
12 VDC
NavNet system