Furuno GD-1700, Operator'S Manual

Page: 115 / 249

3. RADAR OPERATION
3-21
3.16.2 Automatic shift
The amount of automatic shift is calculated with speed, and the amount of shift is
limited to 60% of the range in use. For example, if you set the shift speed setting
for 15 knots and the ship is running at 10 knots, the amount of shift will be 40%.
The formula for determining shift amount is as shown below.
Ship's speed
Shift speed setting
X 0.6 = Amount of shift(%)
Automatic shift mode is only available in the head-up mode.
Setting automatic shift maximum speed
1. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys.
2. Press the RADAR DISPLY soft key.
3. Press the SHIFT soft key to show the shift soft keys.
4. Press the AUTO S.SPD soft key to display the auto ship speed setting
window.
AUTO SHIP SPEED
15
Auto ship speed setting window
5. Adjust the cursor pad or [ENTER] knob to set the maximum speed of your
vessel, and then push the [ENTER] knob or the ENTER soft key to set. The
setting range is 1-999 kt and the default setting is 15 kt.
Automatic shift
1. Press the [HIDE/SHOW] soft key to show the radar soft keys if not displayed.
2. Press the RADAR DISPLY soft key.
3. Press the SHIFT soft key followed by the AUTO key to shift the sweep origin.
4. Press the RETURN soft key to finish.
5. To cancel shift, press the RADAR DISPLY, SHIFT and OFF soft keys in that
order.