Furuno GD-1700, Operator'S Manual

Page: 135 / 249

3. RADAR OPERATION
3-41
3.25.7 ARP, TTM target data
You can show motion trends (range, bearing, course, speed, CPA and TCPA) for
ARP or TTM targets. Note that TARGET ID NUMBER, in the ARP SETUP menu,
must be turned on to display this data.
1. Place the cursor on the target you want to see its data.
2. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys.
3. Press the TARGET and TARGET INFO soft keys. The data of the selected
target appears. (If an EBL/VRM data box is displayed ARP data will be under
it.)
4. Press the RETURN soft key to finish.
5. To erase the ARP/TTM data box, select corresponding target number with
the cursor, then press the [CLEAR] key.
.250/ 319.9
°
T
.125nm
SP
H-UP
359.9
°
R
0.240nm
TARGET
TRAIL
TLL
OUTPUT
ACQ
TARGET
INFO
RETURN
ARP
Target
No.01 VECTOR TRUE 15min
CSE 359.9
°
T SPD 12.5kt
CPA 2.21nm TCPA 12:35
CPA and TCPA
Course and Speed
Target No., Vector Reference (True), Vector Time
01
Cursor
+
+
ARP target data