Furuno FSV25S, Operator'S Manual

Page: 115 / 163

6. OTHERS MENU
6-15
Net Shoot Setting menu
The [Net Shoot Setting] menu sets up net shoot parameters. Click [Net Shooting Set-
ting] on the [Initial Setting] menu to show the [Net Shoot Setting] menu.
[Net Diameter] : Sets net diameter in increments of 10 meters. The setting range is
200 m to 1000 m.
[Tilt Interlock] : Turns on/off interlocking of diameter of net course mark with tilt angle.
[Net Plot Corr-LYR1] - [Net Plot Corr-LYR5] : The movement of the net during net
shooting is plotted using water current speed and direction fed from a current indica-
tor. The current indicator feeds that data for three depths (layers), thus net movement
will be different at each layer. Determine degree of difference among layers consider-
ing net, sea conditions, etc. If 50% is set, for example, the net movement plot mark
moves at speed of 50% of water current speed.
Stabilization menu
The [Stabilization] menu compensates for the affects of pitching and rolling. Click [Sta-
bilization] on Initial [Setting menu] to show the [Stabilization] menu. Requires a motion
sensor.
[Stabilization] : Turns stabilization on/off.
Note: The default function of the F9 key turns stabilization on/off.
[Pitch Angle Cor] : Offsets the pitch angle error generated by the motion sensor.
[Roll Angle Cor] : Offsets the roll angle error generated by the motion sensor.
Quit
Net Shoot Setting
Net Diameter : 500m
Tilt Interlock : ON
Net Plot Corr-LYR1 : 50%
Net Plot Corr-LYR2 : 50%
Net Plot Corr-LYR3 : 50%
Net Plot Corr-LYR4 : 50%
Net Plot Corr-LYR5 : 50%
Quit Stabilization
Stabilization : ON
Pitch Angle Cor : 0.0
Roll Angle Corr : 0.0
Sensor : Standard
F8