Furuno FSV25S, Operator'S Manual, Page: 114 / 163

6. OTHERS MENU
6-14
Net SONDE Setting menu
The [Net SONDE Setting] menu sets up the net sonde. Click [Net SONDE Setting] on
the [Initial Setting] menu to show the [Net SONDE Setting] menu.
[Number Of XMTR] : Sets number of transmitter units used, from 0 to 10. When the
total value of [XMTR Distance] is smaller than the setting value of [Net Length], max.
10 transmitter units can be used.
[XMTR Distance] : Sets the distance between transmitters. Select this item then push
the left button to set the distances.
[Net Length] : Sets net length in increments of 100 m. The minimum value changes
according to [Number of XMTR] and [XMTR Distance].
[Depth Display] : Selects which sonde depth data to show, a
shown in the right figure. Select this item and push the left button
to select net sondes. The check mark shows current selection
(Max. 3).
[Display Style] : Selects the display format of the net depth, Nu-
meric or Graph.
[Depth Graph Range] : Sets the depth range of the SONDE
graph. The settings 50 m, 100 m, 150 m, 200 m.
*Setting cannot be adjusted after the net is thrown.
Quit Net SONDE Setting
Number of XMTR* : 3
XMTR Distance ...
Net Length : 1800m
Depth Display ...
Display Style : Numeric
Depth Graph Range : 100m
Quit XMTR Distance
End of Net to S1 : 400m
S1->S2 : 400m
S2->S3 : 400m
S3->S4 : 400m
Quit
Cancel
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10