Furuno FSV-84, Operator'S Manual

Page: 18 / 240

1. OPERATIONAL OVERVIEW
1-2
1.2 Turning the Power On/Off
1.2.1 Turning the power on
Press the POWER ON (|) switch. A beep sounds, the lamp above the switch
lights, and the last-used mode is presented.
1.2.2 Turning the power off
1. First retract the transducer with the
[ ]
key. The lamp above the switch blinks
while the transducer is being raised and lights steadily when it is fully raised.
Note: While raising the transducer, the ship speed must be no more than 15
kts to prevent damage to the transducer and hull unit.
2. Press the POWER OFF ( ) switch for more than one second, after the
[ ]
key lights steadily.
Note: The transducer is automatically retracted into the tank if the POWER
OFF ( ) switch is pressed before retracting the transducer. However,
for safety purposes, make it a habit to retract the transducer before
turning off the power.
TRANSDUCER POWER
POWER ON switch
POWER OFF
switch
Retraction key
Mid protrusion key
Full protrusion key
POWER & TRANSDUCER controls