Furuno FS-2575, Operator'S Manual

Page: 93 / 165

7. NBDP SYSTEM OVERVIEW
7-7
Function key [F3]: Operate menu
The Operate menu mainly controls transmitting and receiving.
1: Call Station
3: File to Send
4: Cancel Sending
5: Scan (Start/Stop)
6: Manual Reception
7: Timer Operation
8: Manual Calling
9: Set Frequency
Operate
2: Macro Operation
Operate menu
1: Call Station Select a station from the station list.
2: Macro Operation Enable macro operation. For details, see paragraph 10.10.
3: File to Send Select a file (to transmit).
4: Cancel Sending Stop sending a file.
5: Scan Start/Stop Start/stop frequency scanning.
6: Manual Reception Select communication mode for reception; AUTO, ARQ, FEC
DIRC.
Note: The FS-2575/5075 is not affected by this setting.
7: Timer Operation Timer programming.
8: Manual Calling Set TX mode and subscriber’s ID number in manual calling.
9: Set Frequency Set TX and RX frequencies in manual calling.