10. NBDP TRANSMITTING, RECEIVING
10-9
10.7 Scanning
The radio equipment scans a group of operator-selected frequencies (channels), and stops
scanning when a signal is received. For registering scan group, see section 8.5.
1. Press the function key
F3
and then the
5
key to open the Scanning Group List on your
screen.
You can confirm the scan channel by pressing the
↑
or
↓
key while pressing the
Shift
key.
*
1
2
3
Scanning Group List
Scanning Group List
2. Press the
↑
or
↓
key to select a scan group and press the
Enter
key.
The scanning starts and the indication “Scan” appears in reverse video. Further, the name of
the scan group appears in the Station Name field.
2002-09-08 2:01:46 UTC Caps-Eng
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name : SAITO-1
Scan HT
Frequency (T/R) : 8344.00 / 8705.00(kHz) Comm Mode : Auto
Comm Status : Connect Send Lock Error
Sending Volume : 100(%) ARQ Error : 0 ARQ Time : 0(sec)
Communication status screen
3. To stop scanning, press the function key
F3
and then the
5
key. “Scan” disappears on
the communication status screen.
10.8 Communication
Buffer
The communication buffer is a temporary memory which stores transmit and receive
messages. To display the contents of the communication buffer, do the following:
1. Escape from the message creation screen.
2. Press the
↓
or
↑
key while pressing the
Fn
key. The contents of the communication
buffer are displayed.
To print them, press the
P
key while pressing the
Ctrl
key. To erase the contents from the
screen, press the
↓
key at the bottom line. To erase the contents of the buffer, press the
function key
F1
and then the
9
key.
Summary of Contents for FS-2575
Page 1: ...SSB RADIOTELEPHONE FS 2575 FS 5075 OPERATOR S MANUAL www furuno co jp MODEL...
Page 14: ...SYSTEM CONFIGURATIONS xii This page is intentionally left blank...
Page 28: ...2 SSB RADIOTELEPHONE 2 8 This page is intentionally left blank...
Page 46: ...4 DISTRESS OPERATIONS 4 14 This page is intentionally left blank...
