Furuno FS-2575, Operator'S Manual

Page: 69 / 165

6. MENU OPERATION
6-3
2. Rotate the ENTER knob to select MODE and then press the ENTER knob.
3. Rotate the ENTER knob to select mode desired and then press the ENTER knob.
4. Rotate the ENTER knob to select CH and then press the ENTER knob.
5. Enter band and band channel with the numeric keys (see section 2.2).
6. Rotate the
ENTER knob to select TX FREQ and then press the ENTER knob.
7. Enter TX frequency with the numeric keys (see section 2.2).
8. Rotate the
ENTER knob to select RX FREQ and then press the ENTER knob.
9. Enter RX frequency with the numeric keys (see section 2.2).
10. Rotate the
ENTER knob to select REGISTER and then press the ENTER knob.
11. Rotate the ENTER knob to select YES and then press the ENTER knob.
6.2.3 Editing user channels
1. Rotate the ENTER knob to select user channel, which you want to edit, on the USER
CH list and then press the ENTER knob.
Press the
ENTER knob.
1: 0101 1111.0 1111.0
2: 0102 1222.0 1222.0
3: 0103 1333.0 1333.0
4: 0104 1444.0 1444.0
5: 0105 1555.0 1555.0
6: 0106 1666.0 1666.0
7: 0107 1777.0 1777.0
JUMP
LIST
2. Rotate the ENTER knob to select item, which you want to edit, and then press the
ENTER knob.
3. Edit the settings referring to paragraph 6.2.2.
4. After setting, rotate the
ENTER knob to select REGISTER and then press the ENTER
knob.
5. Rotate the ENTER knob to select YES and then press the ENTER knob.
Note: If the settings for both MODE and CH overlap with ones for existing user channels,
the alarm for key error sounds and the warning pop-up message appears when selecting
REGISTER.
6.2.4 Deleting user channels
Deleting individual user channel
1. Rotate the ENTER knob to select an user channel, which you want to delete, on the
USER CH list, and then press the 4 key.
2. Rotate the ENTER knob to select DELETE SELECTION and then press the ENTER
knob.
3. Rotate the ENTER knob to select YES and then press the ENTER knob.