Furuno FS-2575, Operator'S Manual

Page: 73 / 165

6. MENU OPERATION
6-7
2. Rotate the ENTER knob to select SQ FREQ and then press the ENTER knob.
T
S
3. Rotate the ENTER knob to adjust frequency (setting range: 500-2000 Hz) and then
press the ENTER knob.
6.5 Key Assignment
You can program function keys (F1, F2 and F3) to provide one-touch access to a required
function. The
1 key is assigned with F1, the 4 key with F2 and the 7 key with F3. The default
programs are RX FREQ for F1, DAILY TEST for F2, TEST CALL for F3. You can program
one of the functions listed below.
• TX/RX FREQ • RX FREQ • MODE
•
AGC
•
TX PWR
•
TX MONITOR
•
TEST CALL
•
MSG FILE
•
DAILY TEST
•
LOG
•
INTERCOM
•
---------- (NONE)*
*: NONE: Not assigned any function
Note: You cannot assign the function key with the same function each other.
1. Rotate the
ENTER knob to select SYSTEM on the MENU screen and then press the
ENTER knob.
2. Rotate the ENTER knob to select KEY ASSIGN and then press the ENTER knob.
3. Rotate the ENTER knob to select F1, F2 or F3 and then press the ENTER knob.
4. Rotate the ENTER knob to select a function desired and then press the ENTER knob.