5. ROUTINE MESSAGE CALLING, RECEVING
5-10
5. Rotate
the
ENTER
knob to select CIRCLE or QUADRANT and then press the
ENTER
knob.
6.
For QUADRANT:
Using the numeric keys, enter latitude and longitude of reference
point and southerly degrees and easterly degrees of area. To change coordinate, select
it and press the
1
key for North or East;
2
key for South or West. After entering data,
press the
ENTER
knob.
7.
For CIRCLE:
Using the numeric keys, enter latitude and longitude of reference point
and radius of area. To change coordinate, select it and press the
1
key for North or
East;
2
key for South or West. After entering data, press the
ENTER
knob.
8. Rotate
the
ENTER
knob to select PRIORITY and then press the
ENTER
knob.
9. Rotate
the
ENTER
knob to select SAFETY or URGENCY and then press the
ENTER
knob.
10. Rotate the
ENTER
knob to select COMM MODE and then press the
ENTER
knob.
11. Rotate the
ENTER
knob to select TELEPHONE or NBDP-FEC and then press the
ENTER
knob.
12. Rotate the
ENTER
knob to select DSC FREQ and then press the
ENTER
knob.
2187.5 kHz
4207.5 kHz
6312.0 kHz
8414.5 kHz
12577.0 kHz
16804.5 kHz
13. Rotate the
ENTER
knob to select DSC frequency desired and then press the
ENTER
knob. The communication frequency changes in conjunction with DSC frequency.
14. Rotate the
ENTER
knob to select GO TO CALL and then press the
ENTER
knob to
send an area call.
15. Communicate by radiotelephone or NBDP (see “Sending message by NBDP terminal
unit” on next page).
16. After you finish communicating, rotate the
ENTER
knob to select QUIT and then press
the
ENTER
knob.
Sending message by NBDP terminal unit
The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.”
appears on the screen of the NBDP terminal unit.
1. Press any key on the NBDP terminal unit to erase the message.
2. Press the function key
F3
on the keyboard of the NBDP terminal unit to open the
Operate menu.
3. Select Call Station and then press the
Enter
key.
4. DSC is selected; press the
Enter
key. Connect appears in reverse video.
5. Type and transmit your message.
6. When you finished sending your message, press the function key
F10
to disconnect the
line.
Summary of Contents for FS-2575
Page 1: ...SSB RADIOTELEPHONE FS 2575 FS 5075 OPERATOR S MANUAL www furuno co jp MODEL...
Page 14: ...SYSTEM CONFIGURATIONS xii This page is intentionally left blank...
Page 28: ...2 SSB RADIOTELEPHONE 2 8 This page is intentionally left blank...
Page 46: ...4 DISTRESS OPERATIONS 4 14 This page is intentionally left blank...
